|
SR-24 Separate keyboard, Four 9-Pin serial outputs, 24 track
arm switches, Large 8mm Display, Keyboard Display
SR-24a Separate keyboard, Five 9-Pin serial outputs, One 9-pin
Serial input, 24 track arm's, Large 8mm Display, Keyboard
Display
Added note 2003
With the development of the RM-6 rack mounted unit we are able to move
most of the electronics from the controller to the machine room. The SR-4 may
be used with a single RS-422 connection to control the RM-6. Whilst the
existing SR-24 may also be used as a remote control for the RM-6 the
separate Display box made it expensive. The new SR-424 is our solution, it may be used as a remote for the RM-6 in the same way but with 24 track arm keys.
The rear panel of the SR-424 is the same as the SR-4, this allows the
SR-424 to be used as a stand alone unit with extra track arm keys. We are also
looking at an ADR version of the SR-424 for the future.
Front Panel drawing of SR424 in pdf
|
